Mechanical Properties:
– Tensile Strength: The tensile strength of 060A35 steel grade is typically in the range of 490-630 MPa. This high tensile strength enables the material to withstand high stress and loading conditions.
– Yield Strength: The yield strength of 060A35 steel grade is around 355 MPa. This indicates the maximum stress that the material can withstand before permanent deformation occurs.
– Elongation: The elongation at break for 060A35 steel grade is typically around 17%. This shows the ability of the material to stretch without fracturing, enabling it to absorb energy before failure.
– Hardness: 060A35 steel grade typically has a hardness of around 150-190 HB. This moderate hardness makes it suitable for various applications where both strength and formability are required.
Technical Properties:
– Density: The density of 060A35 steel grade is around 7.85 g/cm³. This provides information about the weight of the material per unit volume, helping in design and calculations.
– Elastic Modulus: The elastic modulus of 060A35 steel grade is typically in the range of 190-210 GPa. This property describes the material’s ability to deform under stress and return to its original shape once the stress is removed.
– Thermal Expansion: The thermal expansion coefficient of 060A35 steel grade is approximately 12×10^(-6)/°C. This property describes how the material expands or contracts with changes in temperature.
Chemical Composition:
– Carbon (C): 060A35 steel grade contains a carbon content of approximately 0.32-0.39%. Carbon provides strength and hardness to the material.
– Manganese (Mn): The manganese content in 060A35 steel grade is typically around 0.50-0.80%. Manganese enhances the material’s strength and promotes grain refinement.
– Silicon (Si): The silicon content in this steel grade is around 0.15-0.35%. Silicon improves the material’s strength and deoxidizes it during the steelmaking process.
– Sulfur (S): The sulfur content in 060A35 steel grade is generally limited to a maximum of 0.035%. Sulfur is added to improve machinability but should be controlled to avoid detrimental effects on mechanical properties.
– Phosphorus (P): The phosphorus content in this steel grade is limited to a maximum of 0.035%. Phosphorus enhances the material’s strength and improves its ability to resist corrosion.
– Other Alloying Elements: Some other common alloying elements found in 060A35 steel grade include small amounts of nickel (Ni), chromium (Cr), and copper (Cu). These elements provide additional strength and enhance specific properties based on their proportions.
[ad_2]